Gorilla Glue 4 Autoflowering Seeds Growing Tips

Grow indoors for optimal results. Ensure that you follow the growing tips outlined in this article, especially when using super croppers. Super cropping can cause stress to plants, so avoid super cropping if possible. Moreover, don’t super stretch your plants too early! Induce flowering and harvesting at the right time will ensure that you’re getting the best results! But before you start super cropping, read our Grow Indoors, Induce Flowering and Harvesting Tips.

Grow indoors

Gorilla Glue 4 autoflowering seeds have the potential to give you two seasons’ worth of harvests. The Gorilla Glue strain is a robust producer that can withstand colder temperatures. This strain is very disease resistant and can tolerate cold nighttime temperatures. In addition to its easy-to-grow qualities, Gorilla Glue is also tolerant to plant diseases.

When to flush this strain, you need to check its trichomes. The first signs of flushing include cloudy buds. In hydroponics, this process may take one week, while in soil, it can take two weeks. When the trichomes are mostly cloudy and have begun to form ambers, it is time to flush your plant. To flush a Gorilla Glue plant, remove dead leaves and trim off the stems and foliage.

The second sign of good weed growth is the presence of flowers. Gorilla Glue 4 grows well indoors. The plant was well developed by the third week of growth. I did not have any second thoughts about super cropping this plant, which can be extremely stressful for plants. Its bud sites are outside of the light’s range, and the lower bud sites are in the shadow of the above growth. During this time, the plant is diverting resources away from budding, instead spending energy transporting water and nutrients through long branches.

Another sign that Gorilla Glue #4 autoflowering seeds will not be successful is an inordinate amount of light. Gorilla Glue #4 plants do well in high light, but not in excessive light. For this reason, growers should be selective when choosing their lighting setup. The most common choice for growers is HIDs, which have been around for over thirty years. HPS lights are generally used for the vegetative and flowering stages. The HID bulbs should be placed 30 to 50 cm above the canopy.

Induce flowering

Among the best autoflowering marijuana strains, Gorilla Glue #4 autoflowering seeds are known for their heavy THC content and fast growth. They are also known as Original Glue, GGA, and Gorilla Glue. This powerful blend of three different strains took first place in the 2014 Los Angeles Cannabis Cup and won the High Times Jamaican World Cup.

Check this out -  How to choose the best Cannabis seed genetics for you to grow

This autoflowering strain produces compact, resin-rich buds indoors and outdoors. A full-sized plant will produce approximately 200 grams of flower. The flowering cycle for this plant is eight to nine weeks. Whether you grow indoors or outdoors, Gorilla Glue autoflowering seeds require optimal growing conditions. By adjusting light and temperature accordingly, you can grow this strain to its maximum potential and reap the fruits of your labor.

When it comes to temperature, GG seedlings require a room temperature of around 80 degrees Fahrenheit during the vegetative phase and 75 degrees Fahrenheit during the flowering stage. Temperature should be reduced ten degrees at night, but not too much. For moisture, Gorilla Glue #4 seedlings need a relative humidity of 60 percent. After their first week of growth, their room humidity should be between forty-five and fifty percent, with the lowest level being at thirty-three percent by harvest.

This autoflowering marijuana seed is very productive and can be harvested early. It is also small and does not need much space and produces healthy yields of up to 600 grams. When you buy Gorilla Glue #4 autoflowering seeds, you can expect to see the pistils early in the flowering stage. Pistils are the female hairs that stick out of the buds. When they first emerge, they are white, but they eventually change to orange by the time you’re ready to harvest. When the pistils mature, they look twisted and dry.

Monitor plants

Growers of Gorilla Glue 4 autoflowering seed strains should carefully monitor their plants during the early growth stage. They should be able to distinguish when their plants are ready for harvest by the appearance of the resinous buds. It is important to provide adequate support to the plants, such as stakes or a ScrOG net. Once a flower is in the first stage, it should begin developing trichomes.

In the seedling stage, distance from light is also important. Seedlings should be far enough from light so they can reach it, but not so far away that they will topple over. Plants develop most of their tissues and organs underground. Roots spread throughout the growing medium in search of water. Leaves develop slowly, but more visible when they are fully developed. By the third week of growth, Gorilla Glue #4 had already started to flower.

Check this out -  Larry OG Seeds Feminized Growing Tips

Watering requirements are high, but Gorilla Glue #4 is quite thirsty. Nonetheless, moderate feeding is enough for it to thrive. A good organic soil with high nitrogen and potassium is recommended, as these nutrients will promote healthy foliage. Voodoo Juice may also be useful during the early growth stage. Generally, hydroponics is the easiest method to grow Gorilla Glue 4 autoflowering seeds.


The taste and aroma of Gorilla Glue #4 are not to be missed. These autoflowering seeds have an earthy and woody aroma with hints of chocolate and coffee. Its flavor is mostly the same as its aroma, though some varieties can have a chemical aftertaste. The high THC content makes it suitable for medical use. Gorilla Glue #4 is a strong hybrid with a distinct aroma and taste.

The Gorilla Glue #4 strain was developed by the legendary Joesy Whales and Mardogg. This strain has won several awards and is considered one of the best in the world. The plant is 60 to 100 centimeters tall with broad leaves, a large apical cola, and secondary clusters of buds. Gorilla Glue is a fast-flowering autoflowering plant, so harvesting it early is important.

The autoflowering plant requires approximately eighteen hours of light, which makes it ideal for indoor and outdoor cultivation. In the event of under or over-lighting, it can experience sub-par yields. For optimal harvesting, try switching to a 20/4 schedule. Gorilla Glue will grow to its full potential in nine to ten weeks. Its sativa dominance ensures a high yield.

For optimal results, grow Gorilla Glue #4 in tightly closed containers, such as Mason jars or a Cannadoor system with CVaults. Gorilla Glue #4 Autoflowering Seeds yield very generously. Once harvested, they should be stored in a dry and dark place. This strain can grow up to two feet tall, so you can expect a yield of about three ounces per plant.


Hermaphroditic Gorilla Gel-four is an excellent grower. It will grow as tall as 4.5 feet and produce a sea of glistening colas. To identify this strain, you need to observe the plant’s growth cycle. It is easy to distinguish the gender of your plants if you know when to remove the helmet head. The helmet head can slow down growth, so remove it as soon as possible.

In hydroponics, flushing Gorilla Glue will begin a week after flowering. In soil, you should wait until most trichomes have turned cloudy. In coco, flushing starts when the first ambers appear. Then, remove the plant’s foliage and buds to harvest the crop. While the harvest time is still a few weeks off, you can start looking for trichomes as early as six weeks before harvest.

Check this out -  Train Wreck Seeds Feminized Growing Tips

At the seedling stage, keep the plant far enough from the light so that it can reach toward the light, but not so far that it can topple over. In seedling stage, most development takes place underground, while the roots spread through the medium in search of water. The leaves grow slowly and gradually, but the bigger the surface area of the leaf, the more it will grow.

In order to get the best flowering results from Hermaphroditic Gorilla G-Glue 4 Autoflowering Seeds, you should keep in mind the light source, nutrient levels, soil type, oxygen flow, and the time of flowering. The first step is germination, when the seeds begin to sprout. To germinate Gorilla Glue seeds, simply place the seed between two dinner plates.

High potency

If you are looking for a strain with an overwhelming potency, consider high potency Gorilla Glue 4 Auto-flowering seeds. Gorilla Glue #4 has a potent aroma and taste that has been attributed to its Diesel genetics. The aroma grows stronger and more overpowering as the plant matures, and its euphoric effect is not a matter of discretion.

High potency Gorilla Glue 4 provides a cerebral rush with a pleasant sour diesel aftertaste. The high is long-lasting and calming, and it helps to ease muscle cramps and pain. This strain is perfect for evenings or weekends on the couch. Its strong effects can last up to four hours and are perfect for relaxing with friends. You can also expect to feel happy and invigorated all day long.

Gorilla Glue #4 Autoflower is a huge producer, but will require support during the flowering stage. It also has an outstanding tolerance to plant disease. Grow Gorilla Glue #4 Autoflower outdoors or indoors, in either case, the plant will be able to produce an abundance of flower. Gorilla Glue 4 Autoflower Seeds have been awarded several times and are highly recommended for novice growers.

The Gorilla Glue strain was crossed with a ruderalis cultivar. Gorilla Glue #4 Autoflower seeds have been known to produce between 19 and 24 percent THC. With a high THC content of about 20%, Gorilla Glue 4 Autoflowering Seeds are highly effective for pain relief. Gorilla Glue 4 Autoflowering Seeds contain several therapeutic compounds that have therapeutic effects. They are antimicrobial and have analgesic properties.https://www.youtube.com/embed/-JDaTZG7cTc